Prometheus's query language supports basic logical and arithmetic operators. For operations between two instant vectors, the matching behavior can be modified.
The following binary arithmetic operators exist in Prometheus:
+
(addition)-
(subtraction)*
(multiplication)/
(division)%
(modulo)^
(power/exponentiation)Binary arithmetic operators are defined between scalar/scalar, vector/scalar, and vector/vector value pairs.
Between two scalars, the behavior is obvious: they evaluate to another scalar that is the result of the operator applied to both scalar operands.
Between an instant vector and a scalar, the operator is applied to the value of every data sample in the vector. E.g. if a time series instant vector is multiplied by 2, the result is another vector in which every sample value of the original vector is multiplied by 2.
Between two instant vectors, a binary arithmetic operator is applied to each entry in the left-hand side vector and its matching element in the right-hand vector. The result is propagated into the result vector and the metric name is dropped. Entries for which no matching entry in the right-hand vector can be found are not part of the result.
The following binary comparison operators exist in Prometheus:
==
(equal)!=
(not-equal)>
(greater-than)<
(less-than)>=
(greater-or-equal)<=
(less-or-equal)Comparison operators are defined between scalar/scalar, vector/scalar,
and vector/vector value pairs. By default they filter. Their behavior can be
modified by providing bool
after the operator, which will return 0
or 1
for the value rather than filtering.
Between two scalars, the bool
modifier must be provided and these
operators result in another scalar that is either 0
(false
) or 1
(true
), depending on the comparison result.
Between an instant vector and a scalar, these operators are applied to the
value of every data sample in the vector, and vector elements between which the
comparison result is false
get dropped from the result vector. If the bool
modifier is provided, vector elements that would be dropped instead have the value
0
and vector elements that would be kept have the value 1
.
Between two instant vectors, these operators behave as a filter by default,
applied to matching entries. Vector elements for which the expression is not
true or which do not find a match on the other side of the expression get
dropped from the result, while the others are propagated into a result vector
with their original (left-hand side) metric names and label values.
If the bool
modifier is provided, vector elements that would have been
dropped instead have the value 0
and vector elements that would be kept have
the value 1
with the left-hand side label values.
These logical/set binary operators are only defined between instant vectors:
and
(intersection)or
(union)unless
(complement)vector1 and vector2
results in a vector consisting of the elements of
vector1
for which there are elements in vector2
with exactly matching
label sets. Other elements are dropped. The metric name and values are carried
over from the left-hand side vector.
vector1 or vector2
results in a vector that contains all original elements
(label sets + values) of vector1
and additionally all elements of vector2
which do not have matching label sets in vector1
.
vector1 unless vector2
results in a vector consisting of the elements of
vector1
for which there are no elements in vector2
with exactly matching
label sets. All matching elements in both vectors are dropped.
Operations between vectors attempt to find a matching element in the right-hand side vector for each entry in the left-hand side. There are two basic types of matching behavior: One-to-one and many-to-one/one-to-many.
One-to-one finds a unique pair of entries from each side of the operation.
In the default case, that is an operation following the format vector1 <operator> vector2
.
Two entries match if they have the exact same set of labels and corresponding values.
The ignoring
keyword allows ignoring certain labels when matching, while the
on
keyword allows reducing the set of considered labels to a provided list:
<vector expr> <bin-op> ignoring(<label list>) <vector expr>
<vector expr> <bin-op> on(<label list>) <vector expr>
Example input:
method_code:http_errors:rate5m{method="get", code="500"} 24
method_code:http_errors:rate5m{method="get", code="404"} 30
method_code:http_errors:rate5m{method="put", code="501"} 3
method_code:http_errors:rate5m{method="post", code="500"} 6
method_code:http_errors:rate5m{method="post", code="404"} 21
method:http_requests:rate5m{method="get"} 600
method:http_requests:rate5m{method="del"} 34
method:http_requests:rate5m{method="post"} 120
Example query:
method_code:http_errors:rate5m{code="500"} / ignoring(code) method:http_requests:rate5m
This returns a result vector containing the fraction of HTTP requests with status code
of 500 for each method, as measured over the last 5 minutes. Without ignoring(code)
there
would have been no match as the metrics do not share the same set of labels.
The entries with methods put
and del
have no match and will not show up in the result:
{method="get"} 0.04 // 24 / 600
{method="post"} 0.05 // 6 / 120
Many-to-one and one-to-many matchings refer to the case where each vector element on
the "one"-side can match with multiple elements on the "many"-side. This has to
be explicitly requested using the group_left
or group_right
modifier, where
left/right determines which vector has the higher cardinality.
<vector expr> <bin-op> ignoring(<label list>) group_left(<label list>) <vector expr>
<vector expr> <bin-op> ignoring(<label list>) group_right(<label list>) <vector expr>
<vector expr> <bin-op> on(<label list>) group_left(<label list>) <vector expr>
<vector expr> <bin-op> on(<label list>) group_right(<label list>) <vector expr>
The label list provided with the group modifier contains additional labels from
the "one"-side to be included in the result metrics. For on
a label can only
appear in one of the lists. Every time series of the result vector must be
uniquely identifiable.
Grouping modifiers can only be used for
comparison and
arithmetic. Operations as and
, unless
and
or
operations match with all possible entries in the right vector by
default.
Example query:
method_code:http_errors:rate5m / ignoring(code) group_left method:http_requests:rate5m
In this case the left vector contains more than one entry per method
label
value. Thus, we indicate this using group_left
. The elements from the right
side are now matched with multiple elements with the same method
label on the
left:
{method="get", code="500"} 0.04 // 24 / 600
{method="get", code="404"} 0.05 // 30 / 600
{method="post", code="500"} 0.05 // 6 / 120
{method="post", code="404"} 0.175 // 21 / 120
Many-to-one and one-to-many matching are advanced use cases that should be carefully considered.
Often a proper use of ignoring(<labels>)
provides the desired outcome.
Prometheus supports the following built-in aggregation operators that can be used to aggregate the elements of a single instant vector, resulting in a new vector of fewer elements with aggregated values:
sum
(calculate sum over dimensions)min
(select minimum over dimensions)max
(select maximum over dimensions)avg
(calculate the average over dimensions)stddev
(calculate population standard deviation over dimensions)stdvar
(calculate population standard variance over dimensions)count
(count number of elements in the vector)count_values
(count number of elements with the same value)bottomk
(smallest k elements by sample value)topk
(largest k elements by sample value)quantile
(calculate φ-quantile (0 ≤ φ ≤ 1) over dimensions)These operators can either be used to aggregate over all label dimensions
or preserve distinct dimensions by including a without
or by
clause.
<aggr-op>([parameter,] <vector expression>) [without|by (<label list>)]
parameter
is only required for count_values
, quantile
, topk
and
bottomk
. without
removes the listed labels from the result vector, while
all other labels are preserved the output. by
does the opposite and drops
labels that are not listed in the by
clause, even if their label values are
identical between all elements of the vector.
count_values
outputs one time series per unique sample value. Each series has
an additional label. The name of that label is given by the aggregation
parameter, and the label value is the unique sample value. The value of each
time series is the number of times that sample value was present.
topk
and bottomk
are different from other aggregators in that a subset of
the input samples, including the original labels, are returned in the result
vector. by
and without
are only used to bucket the input vector.
Example:
If the metric http_requests_total
had time series that fan out by
application
, instance
, and group
labels, we could calculate the total
number of seen HTTP requests per application and group over all instances via:
sum(http_requests_total) without (instance)
Which is equivalent to:
sum(http_requests_total) by (application, group)
If we are just interested in the total of HTTP requests we have seen in all applications, we could simply write:
sum(http_requests_total)
To count the number of binaries running each build version we could write:
count_values("version", build_version)
To get the 5 largest HTTP requests counts across all instances we could write:
topk(5, http_requests_total)
The following list shows the precedence of binary operators in Prometheus, from highest to lowest.
^
*
, /
, %
+
, -
==
, !=
, <=
, <
, >=
, >
and
, unless
or
Operators on the same precedence level are left-associative. For example,
2 * 3 % 2
is equivalent to (2 * 3) % 2
. However ^
is right associative,
so 2 ^ 3 ^ 2
is equivalent to 2 ^ (3 ^ 2)
.
This documentation is open-source. Please help improve it by filing issues or pull requests.